02 932 1711
086 360 8600
LINE ID1: prctec-center
LINE ID2: prcsense

Product Category


2
>> UV Sensor / Amplifier
1

CAN to USB converter box, up to 8 digital UV sensors can be connected.
2

Digital UV-Sensor, high resolution, wide dynamic range, CAN bus signal, incl. temperature measurement, temperature compensation
3

Digital waterproof UV-Sensor for outdoor use, high resolution, wide dynamic range, CAN bus signal, incl. temperature measurement, temperature compensation
4

Digital axis oriented in-chamber UV-Sensor, high resolution, wide dynamic range, CAN bus signal, incl. temperature measurement, temperature compensation
5

Digital 10 bar water pressure proof UV-Sensor for low pressure lamps, high resolution, wide dynamic range, CAN bus signal, incl. temperature measurement, temperature compensation
6

Digital UV-Sensor for DVGW certified water purifiers, high resolution, wide dynamic range, CAN bus signal, incl. temperature measurement, temperature compensation
7

Standard surface-mount 180o FOV UV Sensor
8

Waterproof UV Sensor for outdoor use
9

Axis oriented in-chamber UV Sensor
10

10 bar water pressure proof UV sensor
for low pressure lamps
11

10 bar water pressure proof UV sensor with G3/4" thread
for medium and low pressure lamps
12

UV Sensor for DVGW certified water purifiers
minimum order quantity 15 pieces
13

UV Sensor for DVGW (160°) and OE-Norm certified water purifiers
minimum order quantity 15 pieces
14

Amplified UV Photodetector with housing
15

Sensor for hard UV irradiation with integrated temperature sensor
can be used permanently up to 170°C (338°F)
16

configure the sensor with an adjustable level output for flash measurements
17

Measurement window for certified UV sensors according to DVGW 294-3 minimum order quantity 15 pieces
18

0.06 mm2 detector area,
TO18 housing
19

0.06 mm2 detector area,
flat TO18 housing
20

0.06 mm2 detector area,
TO18 housing, two isolated pins, one additional grounded pin
21

0.06 mm2 detector area,
flat TO5 housing
22

0.2 mm2 detector area,
TO18 housing
23

0.2 mm2 detector area,
flat TO18 housing
24

0.2 mm2 detector area,
TO18 housing, two isolated pins, one additional grounded pin
25

0.2 mm2 detector area,
according to EN298 standard (flame detecton), TO5 housing with concentrating
26

0.5 mm2 detector area,
TO18 housing
27

1.00 mm2 detector area,
TO18 housing
28

1.00 mm2 detector area,
flat TO18 housing
29

1.00 mm2 detector area,
TO18 housing, two isolated pins, one additional grounded pin
30

1.00 mm2 detector area,
flat TO5 housing
31

4.00 mm2 detector area,
TO5 housing
32

7.6 mm2 detector area,
flat TO5 housing, two isolated pins, one additional grounded pin
33

0.06 mm2 detector area,
TO18 housing
34

0.2 mm2 detector area,
TO18 housing
35

0.2 mm2 detector area,
TO5 housing
36

0.5 mm2 detector area,
TO18 housing
37

1.00 mm2 detector area,
TO5 housing
38

1.00 mm2 detector area,
TO18 housing
39

7.6 mm2 detector area,
TO5 housing
40

0.06 mm2 detector area,
TO18 housing
41

0.2 mm2 detector area,
TO18 housing
42

0.2 mm2 detector area,
TO5 housing
43

0.5 mm2 detector area,
TO18 housing
44

1.00 mm2 detector area,
TO5 housing
45

1.00 mm2 detector area,
TO18 housing
46

7.6 mm2 detector area,
TO5 housing
47

0.06 mm2 detector area,
TO18 housing
48

0.06 mm2 detector area,
TO5 housing
49

0.2 mm2 detector area,
TO5 housing
50

0.5 mm2 detector area,
TO18 housing
51

1.00 mm2 detector area,
TO5 housing
52

1.00 mm2 detector area,
TO18 housing
53

7.6 mm2 detector area,
TO5 housing
54

0.2 mm2 detector area,
TO18 housing
55

0.5 mm2 detector area,
TO18 housing
56

1.00 mm2 detector area,
TO5 housing, cosine corrected
57

4.00 mm2 detector area,
TO5 housing, cosine corrected
58

approx. 1.8 pW/cm² ... 18 nW/cm²
Replaces obsolete UV10.SF and UV10.T2E
59

approx. 18 pW/cm² ... 180 nW/cm²
60

approx. 180 pW/cm² ... 1.8 µW/cm²
61

approx. 1.8 nW/cm² ... 18 µW/cm²
62

approx. 18 nW/cm² ... 180 µW/cm²
63

approx. 180 nW/cm² ... 1.8 mW/cm²
64

approx. 1.8 µW/cm² ... 18 mW/cm²
65

approx. 18 µW/cm² ... 180 mW/cm²
66

approx. 180 µW/cm² ... 1.8 W/cm²
curing lamp control
67


approx. 1.8 mW/cm² ... 18 W/cm²
UV hardening control and other very high radiation sources
68

approx. 1.8 nW/cm² ... 18 µW/cm²
69

approx. 18 nW/cm² ... 180 µW/cm²
70

approx. 180 nW/cm² ... 1.8 mW/cm²
71

approx. 1.8 µW/cm² ... 18 mW/cm²
72

approx. 18 µW/cm² ... 180 mW/cm²
73

approx. 180 µW/cm² ... 1.8 W/cm²
74

approx. 1.8 mW/cm² ... 18 W/cm²
UVA hardening lamp control
75

max. 7.5 µW/cm²
76

max. 75 µW/cm²
77

max. 0.75 mW/cm²
78

approx. 18 pW/cm² ... 180 nW/cm²
79

approx. 180 pW/cm² ... 1.8 µW/cm²
80

approx. 1.8 nW/cm² ... 18 µW/cm²
81

approx. 18 nW/cm² ... 180 µW/cm²
82

approx. 180 nW/cm² ... 1.8 mW/cm² purification lamp control
83

approx. 1.8 µW/cm² ... 18 mW/cm²
84

approx. 18 µW/cm² ... 180 mW/cm²
85

approx. 180 µW/cm² ... 1.8 W/cm²
86

approx. 3 UVI
87

approx. 30 UVI
88

approx. 4.2 nW/cm² ... 43 µW/cm²
89

approx. 42 nW/cm² ... 430 µW/cm²
90

approx. 420 nW/cm² ... 4.3 mW/cm²
91

approx. 4.2 µW/cm² ... 43 mW/cm²
92

approx. 42 µW/cm² ... 430 mW/cm²
93

approx. 420 µW/cm² ... 4.3 W/cm²
94

approx. 4.2 nW/cm² ... 43 µW/cm²
95

approx. 42 nW/cm² ... 430 µW/cm²
96

approx. 420 nW/cm² ... 4.3 mW/cm²
97

approx. 4.2 µW/cm² ... 43 mW/cm²
98

approx. 42 µW/cm² ... 430 mW/cm²
99

approx. 420 µW/cm² ... 4.3 W/cm²
100

M12x1 thread, 32 mm length, integrated sensor connector, price incl. 2 m plug cable.
101

M12x1 thread, material teflon (PTFE), 31 mm length, integrated sensor connector, price incl. 2 m plug cable.
102

Kit for initial testing setup
103

Dual Channel Photodiode Amplifier
versatile, multi- configurable amplification of currents from pA range up to µA range.
Well suited for experimental setup and small series.
104

versatile 2-channel current to voltage converting amplifier, one analog and one digital output
105

transmitter (current amplifier) with output current of 4-20mA to include
photodiodes into an industrial 4-20 mA data bus
maximum photocurrent: 250µA
106

transmitter (current amplifier) with output current of 4-20mA to
include photodiodes into an industrial 4-20 mA data bus
maximum photocurrent: 2,5µA
107

transmitter (current amplifier) with output current of 4-20mA to
include photodiodes into an industrial 4-20 mA data bus
maximum photocurrent: 18nA
108

voltage amplifier, conversion of photocurrent into a 0-5V output
signal
maximum photocurrent: 500µA
109

voltage amplifier, conversion of photocurrent into a 0-5V output
signal
maximum photocurrent: 5µA
110

voltage amplifier, conversion of photocurrent into a 0-5V output
signal
maximum photocurrent: 40nA
111

Reference Standard for all offered photodiode amplifiers with rugged shielded housing, cables, power supply and traceable calibration.
112

broadband photodiode (gallium-nitride) in TO18 housing
113

broadband UV photodiode (gallium nitride) in ultra compact 1608 SMD housing
114

UVB/UVC photodiode (aluminium gallium nitride) in a TO18 housing
115

UVB/UVC photodiode (aluminium gallium nitride) in a 3528 SMD housing
116

UVC photodiode, only sensible in the UVC