
Product Category
- 1GHM product
- 2UV Sensor / Amplifier
- 3เครื่องวัดอัตราการไหล
Flowmeter - 4Encoder
- 5Electrical Engineering
- Installation safety testers [1]
- Oscilloscopes [2]
- Multimeters [3]
- Current clamp multimeters [4]
- Voltage testers [5]
- Waveform generators [6]
- Spectrum analyzers [7]
- Cable locators & testers [8]
- Power analyzers [9]
- LCR & component tester [10]
- Analog meters & built-in devices [11]
- Signal level meters [12]
- Electronics data loggers [13]
- Workshop equipment for electronics [14]
- 6UV Meter / Controller
- 7UV Lamp / LED / Laser
- 8เครื่องวิเคราะห์ก๊าซ
Combustible Gas Analyzer - 9เครื่องวัดก๊าซ
Gas Detector-Portable - 10USB Microscope
- 11เครื่องวัดฝุ่น - Air Quality
- 12เครื่องวิเคราะห์การเผาไหม้ก๊าซในรถยนต์
Automotive Micro Bench for CO, CO2 and HC - 13เครื่องวัดและบันทึกข้อมูลขนาดจิ๋ว
Mini Data Logger - 14Sensor วัดระยะ
Ultrasonic Distance Sensor - 15เครื่องมือวัดอุตุนิยมวิทยา
- 16Ultrasonic anemometer
- 17Panel Meter
- 18CMOS Sensor Wide dynamic range
- 19control valves
- 20Sensors(prctec)
- 21รางป้องกันสายเคเบิ้ล
Cable Protectors - 22Power supply
- 23ตัวแปลงสัญญาณไฟฟ้ามาตรฐาน (ZIEHL)
Measuring Transducers- DC Current Voltage [1]
- AC/DC Current-Voltage [2]
- AC - Current - Transducers [3]
- EC - Decharation of Comformity STWQ [4]
- Current Relay For Photovoltaic – systems [5]
- Twilight Switches [6]
- Phase-Monitor Relays Type PS [7]
- Voltage-monitor Relays [8]
- Current-Relays for current-recognition Type STWs [9]
- Electronic Current-Transformers Current-Sensors [10]
- Frequency- and Speed-Relays [11]
- 24เซ็นเซอร์วัดความชื้นน้ำมัน/Dew point
- 25เซนเซอร์วัดความชื้นในน้ำมัน
Oil humidity sensor - 26เครื่องทดสอบแรงดันไฟฟ้า
Voltage Tester - 27ดิจิตัลมัลติมิเตอร์
Digital Multimeter - 28ดิจิตอลแคลมป์มิเตอร์
Digital Clamp Meter - 29Appliance Tester
- 30เครื่องทดสอบความปลอดภัย
Safety Instrument - 31Installation Tester
- 32เครื่องวัดแสงแดดและอุณหภูมิ
light and Temperature Instrument - 33เครื่องมือทดสอบไฟฟ้า
Electrical Tester - 34AC Current Measurements
- 35Surge Protector
- 36Surge Protector_K-surge
- 37LINE/NOISE FILTER
- 38MOV Test - เครื่องวัด/ทดสอบอุปกรณ์ฟ้าผ่า
- 39Hour meter /Timer / Counter
- 40เครื่องวัดไฟฟ้า
- 41เซ็นเซอร์วัดระยะ
Laser distance, Ultrasonic sensor... - 42Solenoid valves
- 43Control Relay
- 44DIS Sensor
- 45Current sensor / Current relay / Voltage sensor
- 46Signal Conditioning / Isolation
- 47เครื่องวัดไฟฟ้าสถิต
Electrostatic field meter - 48Vibration / Shock Measurement
- 49Computer Controlled Measurement Amplifiers
- 50Torque Measurement
- 51Viscometer
เครื่องวัดความหนืด - 52Wireless Sensors
- 53Brix - เครื่องวัดความหวาน
- 54PID Controller
- 55Signal Simulator
- 56HMI Touch Screen & Controller
- 57เครื่องควบคุมการฟักไข่
- 58PROFESSIONAL DATA LOGGER
- 59Water leak detector - เครื่องตรวจจับน้ำรั่วซึม
- 60Microscope - กล้องจุลทรรศน์, กล้องขยาย
- 61เครื่องชั่งอุตสาหกรรม/LAB
- 62Calibration weights - น้ำหนัก-สอบเทียบ
- 63บริการให้เช่าเครื่องมือวัด
- 64ELECTROMAGNETIC FIELD TESTER - เครื่องวัดสนามแม่เหล็กและสนามไฟฟ้า
- 65REFRACTOMETER
- 66Leak detector - เครื่องตรวจสอบรอยรั่วซึม
- 67Spectrum Analyzers
- 68Heat detector อุปกรณ์ตรวจจับความร้อน
- 69EV Charger
- 70Meter ห้องเย็น/ตู้แช่แข็ง
- 71Heater อุตสาหกรรม
- 72Premosys
- 73QR Code Reader / Barcode Reader สำหรับอุตสาหกรรมและไลน์ผลิต
- 74สมัครงาน
- 75Download Brochure/Catalog
30
>>
เครื่องทดสอบความปลอดภัย
• measurement of insulating resistance and calculation of
the resulting leakage current
• testing voltages of 50 V, 100 V, 250 V, 500 V and 1000 V
• selectable limiting values for ISO measurement, green LED for “PASS”, red LED for testing voltage/external voltage
• resistance measurement with a testing current of 200 mA for testing protective conductor connections
• measurement of polarization index (PI) and dielectric absorption rate (DAR)
• switchable probe tip for triggering the measuring process
• internal memory for 100 measuring values per measuring function
• TRUE RMS voltage measurement with low-pass filter
• including case, switchable probe tip, silicone measuring leads, magnetic hook, alligator clips, rubber protective frame and batteries
• testing voltages of 50 V, 100 V, 250 V, 500 V and 1000 V
• selectable limiting values for ISO measurement, green LED for “PASS”, red LED for testing voltage/external voltage
• resistance measurement with a testing current of 200 mA for testing protective conductor connections
• measurement of polarization index (PI) and dielectric absorption rate (DAR)
• switchable probe tip for triggering the measuring process
• internal memory for 100 measuring values per measuring function
• TRUE RMS voltage measurement with low-pass filter
• including case, switchable probe tip, silicone measuring leads, magnetic hook, alligator clips, rubber protective frame and batteries
• measurement of the protective conductor line and of the
equipotential bonding line with a testing current of 200 mA
• measurement of the insulation resistance with testing voltages of 100 V, 250 V, 500 V and 1000 V
• line impedance and loop impedance measurement (optional without tripping of the RCD) with calculation of the shortcircuit current (PFC/PSC)
• complete testing of RCDs with nominal fault currents of 10/30/100/300/500/1000 mA
• measurement of contact voltage (without tripping), tripping time and tripping current (ramp test) of residual current operated device (RCD)
• phase-sequence testing in three-phase mains
• voltage measurement up to 500 V and online voltage monitoring
• measurement of the insulation resistance with testing voltages of 100 V, 250 V, 500 V and 1000 V
• line impedance and loop impedance measurement (optional without tripping of the RCD) with calculation of the shortcircuit current (PFC/PSC)
• complete testing of RCDs with nominal fault currents of 10/30/100/300/500/1000 mA
• measurement of contact voltage (without tripping), tripping time and tripping current (ramp test) of residual current operated device (RCD)
• phase-sequence testing in three-phase mains
• voltage measurement up to 500 V and online voltage monitoring
in addition to the BENNING IT 110 :
• testing of universal current-sensitive RCDs of type B
• current measurement (TRUE RMS) by means of current clamp adapter (optional)
• illumination measurement by means of lux sensor (optional)
• earthing measurement by means of three-wire measuring method (optionally with earthing set)
• integrated measured value memory for 500 measurements
• USB and RS 232 interface
• BENNING PC-Win IT 120 B software included in delivery
• testing of universal current-sensitive RCDs of type B
• current measurement (TRUE RMS) by means of current clamp adapter (optional)
• illumination measurement by means of lux sensor (optional)
• earthing measurement by means of three-wire measuring method (optionally with earthing set)
• integrated measured value memory for 500 measurements
• USB and RS 232 interface
• BENNING PC-Win IT 120 B software included in delivery
• measured value memory covering four levels: object/ block/ fuse/
measuring point
• bidirectional interfaces (USB / RS 232)
• upload of installation structures and download of measured values
• integrated real-time clock (measured value with date/ time)
• unambiguous „PASS“ / „FAIL“ indication by means of green/ red LED on the tester and on the switchable „Commander“ probe tip
• „Commander“ probe tip with „TEST“ and „MEM“ key as well as bright LED measuring point illumination
• connection for barcode scanner for identifying the measuring point and renaming the storage location
• help function with connecting diagram
• graphic display with background lighting
• power supply by means of six NiMH storage batteries (AA)
• device with integrated storage battery charging function
• delivery including case, storage batteries, measuring leads, charging cable, switchable „Commander“ probe tip, PC software and calibration recor
• bidirectional interfaces (USB / RS 232)
• upload of installation structures and download of measured values
• integrated real-time clock (measured value with date/ time)
• unambiguous „PASS“ / „FAIL“ indication by means of green/ red LED on the tester and on the switchable „Commander“ probe tip
• „Commander“ probe tip with „TEST“ and „MEM“ key as well as bright LED measuring point illumination
• connection for barcode scanner for identifying the measuring point and renaming the storage location
• help function with connecting diagram
• graphic display with background lighting
• power supply by means of six NiMH storage batteries (AA)
• device with integrated storage battery charging function
• delivery including case, storage batteries, measuring leads, charging cable, switchable „Commander“ probe tip, PC software and calibration recor